Answer of your leaving message
Wasn't getting notifications on my droid turbo anymore so tried factory reset of iCam HD. Never beeped. Blue light never flashed. On power-up, blue light comes on and stays on forever. Camera doesn't move/try to calibrate, nothing.
Tried to upgrade firmware by downloading https://www.dropbox.com/s/nm6l8qckst66ih3/icampro_362.zip?dl=0 but dropbox gives 404 error, link not found. Please help. Thanks.

2018-02-18 20:35:22****************************************
iCMa0dm1f,

by Tim



A. Please must use this tool to format the SD card on PC
https://www.sdcard.org/downloads/formatter_4/index.html
B.
Rebuild the firmware from the external SD card : This is a manual re-build firmware procedure for your reference
(recovery and cure rate is more than 90%)
Download file
https://www.dropbox.com/s/mzj48a2o2hafm5h/iCam_iBabi_v3716.rar?dl=0
- Uncompress/unzip it to ROOT directory of a MicroSD card [PC->SD]
- Insert the card to the camera
- Plug power cord of it. CAM will auto detect the codes in the Card (beep) to do the update ( blue light is on )
- Auto motor calibration/rotation (About 40~50 seconds)
- Wait till front blue led is blinking. (About 2-3 minutes)
- Unplug power cord
- Take card out
- Plug power cord again and the blue led will keep blink ( waiting for installation )

Installation: https://www.youtube.com/watch?v=V-j_OzXsANo , If you are successful, please erase the card for normal use.

PS – this is what you see during the process
C.
Insert the card with unzipped files
Plug in power
Short beep ( camera detect and read the files ) in 5 seconds
After about 40 seconds
Two short beeps ( writing complete )
Blue and Green lights blinking – done ( wrote in )
Unplug the power
Remove the SD and erase it