Answer of your leaving message
Cannot seem to reset to reinstall
Blue light continuous but when I press buttons on side to reset setting nothing happens

Press the inserted hole. As well as wps button

by Manu


Dear Manu,thank you for the mail.

A. Please must use this tool to format the SD card on PC
https://www.sdcard.org/downloads/formatter_4/index.html
B.
Rebuild the firmware from the external SD card :
This is a manual re-build firmware procedure for your reference (recovery and cure rate is more than 90%)
Download file https://www.dropbox.com/s/mzj48a2o2hafm5h/iCam_iBabi_v3716.rar?dl=0
- Uncompress/unzip it to ROOT directory of a MicroSD card [PC->SD]
- Insert the card to the camera
- Plug power cord of it. CAM will auto detect the codes in the Card (a
beep) to do the update ( blue light is on )
C. - Wait till front blue led and green led are blinking. (About 1-2
minutes)
- Unplug power cord
- Take card out.
- Plug power cord again and the blue led will keep blink ( waiting for
installation )

Installation: https://www.youtube.com/watch?v=V-j_OzXsANo , If you are successful, please erase the card for normal use.

PS – this is what you see during the process
Insert the card with unzipped files
Plug in power
Short beep ( camera detect and read the files ) in 5 seconds
After about 40 seconds
Two short beeps ( writing completed )
Blue and Green lights blinking – done ( wrote in - successful )
Unplug the power
Remove the SD and erase it