Answer of your leaving message
Please help me. I can't to instal this camera.

by Sartono Gurning


Dear Sartono, thank you for the mail.

Please follow the steps and let us know which step goes wrong if failed. Thank you.

Firstly, please try to hardware reset and install procedure to see if the camera responses.
RESET : https://www.youtube.com/watch?v=VNvftkbS__c
INSTALL : https://www.youtube.com/watch?v=IR_m6dlKmAo / https://www.youtube.com/watch?v=V-j_OzXsANo

If the camera does not response to the RESET. No beep and no blinking blue led :
Please try this below :
A.Please must use this tool to format the SD card on PC
https://www.sdcard.org/downloads/formatter_4/index.html
B.
Rebuild the firmware from the external SD card :
Download file https://www.dropbox.com/s/mhl2l30tuxb0d6b/iCAM%20Pro_v421.rar?dl=0
- Uncompress/unzip it to ROOT directory of a MicroSD card [PC->SD] ( 1 file and 1 folder )
- Power off the camera
- Insert the card to the camera
- Plug power cord of it. CAM will auto detect the codes in the Card (a
beep) to do the update ( blue light is on ) C.
- Wait till front blue led and green light are blinking ( 2 beeps ).
(About 1-2 minutes)
- Unplug power cord
- Take card out
- Plug power cord again and the blue led will keep blink ( waiting for
installation )

Installation: https://www.youtube.com/watch?v=V-j_OzXsANo , If you are successful, please erase the card for normal use.

PS – this is what you see during the process Insert the card with unzipped files Plug in power Short beep ( camera detect and read the files ) in 5 seconds
After about 40 seconds Two short beeps ( writing complete ) Blue and Green lights blinking – done ( wrote in - successful )
Unplug the power Remove the SD and erase it



Dear Sartono, thank you for the mail.

Please follow the steps and let us know which step goes wrong if failed. Thank you.

Firstly, please try to hardware reset and install procedure to see if the camera responses.
RESET : https://www.youtube.com/watch?v=VNvftkbS__c
INSTALL : https://www.youtube.com/watch?v=IR_m6dlKmAo / https://www.youtube.com/watch?v=V-j_OzXsANo

If the camera does not response to the RESET. No beep and no blinking blue led :
Please try this below :
A.Please must use this tool to format the SD card on PC
https://www.sdcard.org/downloads/formatter_4/index.html
B.
Rebuild the firmware from the external SD card :
Download file https://www.dropbox.com/s/mhl2l30tuxb0d6b/iCAM%20Pro_v421.rar?dl=0
- Uncompress/unzip it to ROOT directory of a MicroSD card [PC->SD] ( 1 file and 1 folder )
- Power off the camera
- Insert the card to the camera
- Plug power cord of it. CAM will auto detect the codes in the Card (a
beep) to do the update ( blue light is on ) C.
- Wait till front blue led and green light are blinking ( 2 beeps ).
(About 1-2 minutes)
- Unplug power cord
- Take card out
- Plug power cord again and the blue led will keep blink ( waiting for
installation )

Installation: https://www.youtube.com/watch?v=V-j_OzXsANo , If you are successful, please erase the card for normal use.

PS – this is what you see during the process Insert the card with unzipped files Plug in power Short beep ( camera detect and read the files ) in 5 seconds
After about 40 seconds Two short beeps ( writing complete ) Blue and Green lights blinking – done ( wrote in - successful )
Unplug the power Remove the SD and erase it