Answer of your leaving message
Mi icam HD will not reset after pressing the reset button for 10 seconds, I had this installed on my iPhone, deleted the app and tried to re-install the camera after it was working perfectly before and now I can’t even get the blue light blinking anymore

by Stephen lisee


Dear Stephen, thank you for the mail.

Here is the reset reference for you just in case :

RESET : https://www.youtube.com/watch?v=VNvftkbS__c
INSTALL : https://www.youtube.com/watch?v=IR_m6dlKmAo / https://www.youtube.com/watch?v=V-j_OzXsANo



If failed ( blue is still on ), try this below : manual firmware re-writing method !!

A. Please must use this tool to format the SD card on PC
https://www.sdcard.org/downloads/formatter_4/index.html

B. Rebuild the firmware from the external SD card :
This is a manual re-build firmware procedure for your reference (recovery and cure rate is more than 90%)
Download file https://www.dropbox.com/s/mzj48a2o2hafm5h/iCam_iBabi_v3716.rar?dl=0

- Uncompress/unzip it to ROOT directory of a MicroSD card [PC->SD]
- Insert the card to the camera
- Plug power cord of it. CAM will auto detect the codes in the Card
(beep) to do the update ( blue light is on )
- Wait till front blue and green leds are blinking. (About 2-3 minutes)
- Unplug power cord
- Take card out.
- Plug power cord again and the blue led will keep blink ( waiting for
installation )

Installation: https://www.youtube.com/watch?v=V-j_OzXsANo , If you are successful, please erase the card for normal use.

PS – this is what you see during the process
Insert the card with unzipped files
Plug in power
Short beep ( camera detect and read the files ) in 5 seconds
After about 40 seconds
Two short beeps ( writing complete )
Blue and Green lights blinking – done ( wrote in - successful )
Unplug the power
Remove the SD and erase it

Thank you