Answer of your leaving message
stooped working will not reset

by Dino Chouzouris


Dear Dino, thank you for the mail. Exchange a SD to try first.

1. Is the front blue led still on ?

If it is, please

If the camera does not response to the RESET. No beep and no blinking blue led :
Please try this below :
A. Please must use this tool to format the SD card on PC
https://www.sdcard.org/downloads/formatter_4/index.html
B.
Rebuild the firmware from the external SD card :
Download file
https://www.dropbox.com/s/mzj48a2o2hafm5h/iCam_iBabi_v3716.rar?dl=0
- Uncompress/unzip it to ROOT directory of a MicroSD card [PC->SD] ( 1 file and 1 folder )
- Power off the camera
- Insert the card to the camera
- Plug power cord of it. CAM will auto detect the codes in the Card (a beep) to do the update ( blue light is on ) C.
- Wait till front blue led and green light are blinking ( 2 beeps ). (About 1-2 minutes)
- Unplug power cord
- Take card out
- Plug power cord again and the blue led will keep blink ( waiting for installation )

Installation: https://www.youtube.com/watch?v=V-j_OzXsANo , If you are successful, please erase the card for normal use.

PS – this is what you see during the process Insert the card with unzipped files Plug in power Short beep ( camera detect and read the files ) in 5 seconds After about 40 seconds Two short beeps ( writing complete ) Blue and Green lights blinking – done ( wrote in - successful ) Unplug the power Remove the SD and erase it