Answer of your leaving message
Hello! I have a problem with my Amaryllo babycam. I cant connect my device with QR code, because my camera cant find that. I connected with wps, but only sound is ok on live, the screen is still black and cant watch live video..

by Tomas

Dear Tomas, thank you for the mail.
A little bit hard to understand the description.

Try the hardware reset and reinstall first.

If not solved, try to rewrite the firmware as steps below :

Please try this below :
A. Please must use this tool to format the SD card on PC
Rebuild the firmware from the external SD card :
Download file
- Uncompress/unzip it to ROOT directory of a MicroSD card [PC->SD] ( 1 file and 1 folder )
- Power off the camera
- Insert the card to the camera
- Plug power cord of it. CAM will auto detect the codes in the Card (a beep) to do the update ( blue light is on )
- Wait till front blue led and green light are blinking ( 2 beeps ). ( About 1-2 minutes – it is done )
- Unplug power cord
- Take card out and erase the card
- Plug power cord again and the blue led will keep blink ( waiting for installation )

Installation: , If you are successful, please erase the card for normal use.

PS – this is what you see during the process

Insert the card with unzipped files
Plug in power Short beep ( camera detect and read the files ) in 5 seconds
After about 40 seconds Two short beeps ( writing complete ) Blue and Green lights blinking – done ( wrote in - successful )
Unplug the power
Remove the SD and erase it

Thank you